Air Cooled Thermic Fluid Pump – For Optimum Performance
As the world is moving towards high production, the efficiency and operation time of the machine is also increasing. In certain industries, the machine operates for 24*7 without any interruption. But in that case, heating is the main problem. Due to the long operation time, the temperature of the machine increases to a certain height that is needed to be reduced otherwise it may lead to the breakdown. The same problem comes with a high-temperature application. In this case, also the temperature needed to be maintained for a non-stop operation.
Here comes the Air-Cooled Thermic Fluid Pump which is widely used for different industrial applications from a long run to high temperature. It is the most cost-effective solution to maintain the temperature of the motor. Air Cooled Thermic Pump contains the isolated fluid at the end-suction of the motor. The isolated fluid is circulated through an air-cooled heat exchanger. With the help of the pump, it applies the air force on the fluid which reduces the temperature of the fluid and transfers it.
Sujal Engineering designed a robust Air Cooled Thermic Fluid Pump which is used in a great variety of industrial applications to maintain the temperature. It is also recommended in the industries where handling of corrosive material is a tedious task. It smoothly transfers the corrosive & abrasive fluid without any leakage. Its unique design reduces the temperature of the motor and bearing and makes sure it remains cool for a longer time. It increases the efficiency of the machine and gives optimum performance.
Application:
- Thermic Fluid handling
- Hot Oil Transfer
- Plastic Industry
- Synthetic Oil Transfer
- Hot water Supply
- Paper Industry
- District Heating System
- Plywood Industry
- Mineral Oil Industry
- Various Chemical Industries
- Textile Industry
- Food Processing Plants
- Sugar Industries
Salient Features:
- Robust construction
- High efficiency
- Low power consumption
- Low maintenance
- Heat resistant mechanical seal
- Long durability & reliable construction
Technical Specification:
- Capacity: up to 180 m3/hr
- Head: up to 80 Meter
- Pressure: up to 8 kg/cm2
- Size: 32 mm to 80 mm
- Speed: up to 3500 rpm
- Temp: up to 250 C
- M.O.C.: Grey Cast Iron, Cast Steel, Alloy Cast Steel
Sujal Engineering is a leading pump manufacturing company which manufactures high quality industrial pumps. Before installing the pump we analyze the customer’s requirement and then provide the precise solution. Because of our reliable and innovative solution, our client’s are extremely satisfied with our service.
