Sujal Engineering has developed the most advanced thermal hot oil pump for circulating heat transfer thermal oils or hot water under high-temperature conditions. Due to a high temperature of the oil or water this thermal hot oil water cooled pump is primarily used to feed an oil burner or furnace.
Our thermal hot oil pumps are most suitable for food processing plants and industrial process applications where hot oil transfer required. Sujal Engineering serves his thermal hot oil pump to chemical and petrochemical industries also. Also provide 24-hour customer services including pump selection, installation, maintenance, repair and parts development.
Salient Features:
- High strength
- Temperature resistant
- Single Stage and end suction centrifugal pumps
- The pump and the motor are connected by means of a flexible coupling on a common base plate
- Maintenance free
- The shaft and other rotating parts can be removed without dismantling the suction and the discharge systems
Technical Specification:
| Type | Horizontal, Single Stage, Suction Volute |
| Capacity | 10 to 400 m³/hr |
| Head | 5 to 100 mtr |
| Discharge Size | Dn 32 to 100 mm |
| Suction Flange | NB 40 to 125 |
| Temperature | 100 to 350° |
| Speed | 1500 to 3000 rpm |
| Pressure | 16 kg/cm2 |
| M.O.C | A216 Carbon Steel (WCB), SS 316, SS 316L, SS 304, Graded Grey Cast Iron |
Industries Can Use Thermal Hot Oil Pump:
- Food And Beverages
- Marine Industry
- Metal Industry
- Gas Plant
- Pulp and Paper Industry
- Wood Industries
- Chemical and Petrochemical Industry
Material of Construction
Cast Steel
